Meyer MDV Series Bedienerhandbuch PDF herunterladen (Seite 11)

INSTALLATION, OPERATING INSTRUCTION AND PARTS MANUAL

MDV SERIES







(Sequence of Operations)



F. TO TURN ENGINE OFF (With or without conveyor

running).

TURTLE Push throttle slow button to

reduce setting to idle (this prevents

engine flooding and hard starting).

5 seconds.









with the conveyor engaged.

unit is to be transported while not

running.



1. As with all power equipment, safety is the number

one concern.

2. Do not operate this equipment until you fully

understand how it functions.

3. Before starting engine, be sure that no one is near

the rear of the unit and that no one is inside the

unit!

4. Do not start the engine or engage the conveyor

(which is interconnected to the spinner) until

everyone is clear from moving parts and flying

material from the spinner.

A. ON/Off System power activated (ready to

start). Spreader engine not running.

Spreader conveyor is not engaged.

B. START (Engine Only)

HOKE (Cold engine.) Hold down for

5 seconds to move the throttle

actuator to the choke position.





starts.

engine warms up. Will stop the

choke function.

C. TO ENGAGE SPREADER CONVEYOR

you are sure no one is in the

hopper

or near the spinner!

D. TO CONTROL CONVEYOR SPEED

RABBIT Hold RABBIT to increase speed.

Note

DO NOT hold switch in HI position

after the desired RPM is achieved

or you will choke and/or stall the

engine.

TURTLE Hold TURTLE to decrease speed.

E. TO DISENGAGE SPREADER CONVEYOR

CONVEYOR Push conveyor button.











Open fuel shut off valve on engine.

STOP Push STOP button and hold

START Hold down button until engine

TURTLE Decreases throttle speed - adjust

RABBIT Increases throttle speed.

CONVEYOR Push CONVEYOR switch only after

G. Do not attempt to start the engine

H. Close fuel shut off valve on engine if

3       NOVEMBER 

PAGE 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Meyer MDV Series Bedienerhandbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spreader Meyer MDV Series